Product description
1. This is a dual channel transmitters that are activated only after having entered a Suitable combination.
2. The units are designed for installation in indoor or outdoor locations.
3. That ensures the utmost security because the transmitted code is changed at each transmission session.
4. The estimated transmission range is 200 m in open space and 35 m indoors.
5. The units are designed to ensure battery life equivalent to an estimated 2 years of operation considering 10 transmissions/day.
Warnings:
1. Note that automatic gate and door systems must be installed exclusively by qualified technical personnel in full compliance with statutory legislation.
2. Before starting the installation procedure check that the values given in the "Technical Specifications “chapter are compatible with the application.
3. This product has been designed to control door openers, gate openers and similar mechanisms. Any other use of the product will be consideredimproper.
Technical parameters:
1. Power supply: 6VDC 2 CR2032 (230mAh) lithium battery 7. Number of passwords: 0 to 8 digits
2. Battery life: about 2 years, based on 10 times per day 8. Launch distance: Wide distance 200 meters,indoor distance 35 meters
3. Operating frequency: 433.92 MHz +/-75 KHz 9. Protection level: IP54
4. Transmit power: about 1mW 10. Dimensions: 85 × 75 × 35mm
5. Encoding format: HCS101 standard format 11. Weight: 150g
6. Working temperature: -20 ° C ~ +55 ° C
7. Number of passwords: 0 to 8 digits
8. Launch distance: Wide distance 200 meters,indoor distance 35 meters
9. Protection level: IP54
10. Dimensions: 85 × 75 × 35mm
11. Weight: 150g
Function description
Automatic lighting: when the ambient light is insufficient, the button input signal led automatically lights up;
Automatic standby: when there is no input signal for 10 seconds, the system automatically enters the power-saving standby state;
| Audible signal | status |
| 1 short beep | Keypad tone |
| 1 long beep | Change password successfully (or transmit code) |
| 3 long beeps | Modification of combination confirmed |
| 5 short beeps | Error during combination put or combination edit operation |
| 10 rapid beeps | Battery low warning signal New batteries required |
Low Voltage Alarm: When the cell voltage is under 4 volts, each time after pressing the button, it’ll make a beeping sound twice.
Product Tags:
|
|
Universal Key Pad Gate Opener 433.92mhz Frequency Garage Door Transmitter Remote Control Safety Images
|
