SL600AC Gear Rack Driven Automatic Sliding Gate Opener
The SL600AC sliding gate opener is designed for residential applications, capable of handling gates weighing up to 600kg with an operating distance of up to 8 meters. This compact, cost-effective solution combines robust performance with advanced safety features.
Tools Required for installation
· Tape measure
· Level · 12mm concrete drill and hammer (when uses expansion screws)
· Phillips head screwdriver
· Straight screwdriver
Product Advantages
- Built-in control board for integrated operation
- Keypad and single button interface options
- Alarm lamp, photo beam, and safety beam interfaces
- User-selectable auto-close function
- Optional spring limit switch or magnetic limit switch
- Manual key release for emergency situations
- Automatic obstacle detection with safety reversal (Smart version)
Technical Specifications
| Unit Model | SL600AC |
| Power Supply | 220V, 50Hz; 110V, 60Hz |
| Maximum Gate Weight | 600kg |
| Motor Power | 280W |
| Gate Moving Speed | 11-13 m/min |
| Limit Switch | Spring (mechanical) / magnetic |
| Remote Control Capacity | 20 pcs / 44 pcs |
| Decoding / Frequency | Rolling code / 433.92MHz |
| Work Duty | S2 15min |
| Noise Level | ≤58dB |
| Operating Temperature | -20°C to 70°C |
| Gross Weight | 9kg |
Main Features
- AC motor with integrated control unit
- Keypad and single button interface options
- Alarm lamp, photo beam, and safety beam interfaces
- User-selectable auto-close function
- Soft start and slow stop (Smart version, optional)
- Auto-reverse function when encountering obstacles during closing
- Manual key release for emergency power failure situations
- Gear driven mechanism with built-in control board
- RF Hopping Code Technology for enhanced security
- Handles gates up to 8 meters long and 600kg weight
- 4-button remote control (open/close/stop functions)
- Supports up to 23 additional remote controls
Installation Requirements
The SL600AC sliding gate opener is suitable for gates weighing less than 600kg with a maximum length of 12 meters. Utilizing rack and gear transmission, this unit must be installed inside the enclosure or yard for optimal protection and performance.
Installation Procedures
Preparation Work
Ensure the sliding gate is correctly installed, the gate rail is level, and the gate moves smoothly manually before installing the gate opener.
Cable Installation
For proper operation and cable protection, bury the motor & power cables and control cables separately using two PVC tubes.
Concrete Pedestal
Precast a concrete pedestal measuring 400mm x 250mm with a depth of 200mm to securely install the SL600AC gate opener. Verify the distance between the gate and gate opener is appropriate before casting the pedestal.
